- About This Product
- Reviews
- Install And Tech Information
Description
The Power Hop Damper Kit for '14-'23 Dodge Ram 2500 4WD trucks dampens axle harmonics under power and allows for extra load carrying capacity.Kit includes:
- Bilstein damper
- Axle mounting bracket
- Mounting hardware
Reviews
Write a reviewNice addition
Mar 4, 2018 | By Richard
Made a noticeable difference in feel when accelerating from a stop. Rear axle feels more planted, and stable.
Power hop kit
May 28, 2018 | By Derek Kesselring
This kit made a huge difference with the axle hop when starting from a stop as well as shifting in gears, only downside is it's really stuff so you hear a rattle from the shock forcing the axle down on a bump. MAKE SURE YOU HAVE TWO PEOPLE for shock install. If you waited to install for a while have some penetrating lube like wd-40 and an impact gun to put bolts in holes.
Nice upgrade.
Oct 11, 2019 | By Allan Dickerson
The install was super easy it was set pretty close already I had to lift the frame up a foot to line the holes up. I noticed a big difference when driving, unloaded the rear feels more planted even running 80 psi. No rattles so far from the shock. Geno's shipped it very fast.
Works great!!!
Oct 31, 2019 | By Danny Parkhurst
Kit was very easy to install with basic hand tools. Instructions are easy to follow and install time took less than for 30 minutes. Would definitely recommend this kit!!
POWER HOP KIT
Apr 11, 2020 | By kelly
I think its good improvement, i have had wheel hope couple of times in sand and road, but are there any torque specs for mount and shock bolts???
Owner Response:Although we are not able to confirm factory specs at this time. We do know that 14mm bolts should not be torqued more than 100 ft. lbs. and 10 mm bolts should not exceed 37 ft. lbs. of torque. I would use this as a guideline and work to 75-80% of the above values. I hope this helps. We will update if able to confirm accurate specs from Ram.
Noticeable ride improvement
Jul 6, 2020 | By John Eckert
Easy 15-20 minute install. Installation note, the shock itself comes partially compressed and strapped, don't cut the strap, I got lucky in the shock was compressed at the right length and the holes line up perfectly, bolted it down, cut the strap, done.
Videos
