FRONT DRIVESHAFT LOOP KIT - FIVE NINE FAB ('14-'24 2500, '13-'24 3500 6.7L WITH CARLI LONG ARM KIT)

Description

APPLICATIONS: 2014-2024 Ram 2500 6.7L and 2013-2024 3500 6.7L with CARLI LONG ARM KIT

This kit is intended specifically for trucks with Carli Long Arm Kits.
It will fit stock trucks, and potentially fit on trucks with other long arm kits, but longer bolts may be needed.

If you are concerned about a front driveshaft failure on your Ram Cummins Turbo Diesel truck - with a Carli suspension and want to avoid a failure turning into a catastrophe, this Front Driveshaft Loop Kit from Five Nine Fab is your answer.

What can happen: A driveshaft failure on our Ram trucks typically occur at the double cardan joint on the upper end of the shaft, next to the transfer case. After the driveshaft or transfer case breaks free, the loose driveshaft is likely to come through the cab floor, and can potentially rupture nearby fuel/brake/transmission lines; even causing fire in some cases.

This driveshaft loop will not prevent driveshaft failures, but it will protect from secondary damage in the event of a failure.

It is still recommended to grease and inspect your driveshaft frequently.

Please Note: "2018 and up models have Center Axle Disconnect (CAD), and the front driveshaft isn't 'driven' unless 4WD is engaged...We believe the driveshaft loop is still a good idea, especially if you spend a lot of time in 4 wheel drive." - from Five Nine Fab.

• Laser-cut and Powdercoated
• 1/4" Plate Steel Construction
• Includes all required high-tensile hardware
• No Drilling Required
• Made in the USA

Reviews

Be the first to write a review

Install and Tech Information

Videos